TP-Link Deco Mesh AC1900 WiFi System, 3-pack

Compre este producto dudando de su eficiencia, pero después de 1 mes de uso puedo decir que estoy satisfecho con la compra, el producto cumple con lo que indica.
En cuanto al envío fue normal debido a las fechas y entregas en diciembre, llegó en perfectas condiciones, con protección y sellado.

Probably the only major downside to me for this product is how ugly the “decos” are, but probably this is because I prefer appliances in black color.

The configuration took literally 5 minutes. Everything is done via Deco App, which is very well designed and easily guide you in the setup of the Decos and your network. Wi-Fi quality significantly improved at home, not just in terms of range but also actual speeds. Fantastic performance!
The only downside in terms of configuration is that you cannot eliminate the guest network after you set it up the first time, but that’s a very minor non-fully-customizable experience detail.

All in all, and only having a month of use, this seems to be a great purchase.

Da muy buena velocidad, muy fácil de instalar

After doing a lot of comparison shopping, I ended up settling on the TP-Link Deco S4. My biggest factors were price, reliability, and range. I have a three floor 4500 sq/ft house built in 2003. The Verizon Fios Gateway router worked, but it suffered considerable slow down as I got to the extremes of the house. With the new three node Deco S4, I get full speed internet at every floor and extreme. Previously, I was able to get 100mb/s maxed out at the router with minimal traffic, but dropped down to 10 mb/s at the extremes of the house, especially the basement and some bedrooms. With one of these on each floor (main on middle), I range from 95-120 upload and download (paying for 100) on all three floors depending on time of day. Interestingly enough, I haven’t suffered much dropoff in signal strength with each mesh node as opposed to the main wired unit acting as the router. I’ve read countless time that unless I’m using a wired backhaul that there would be signal dropoff at the mesh points, but I haven’t witnessed any significant drop. I also purchased this system as it had ethernet ports for backhaul (if I needed to improve speed) and accesspoint use on each node, but I don’t use any other than one at the main router for my Phillips hue bridge.

The design is simple and clean. I was debating on saving $10 and getting the M4 (identical internals), but figured I was already scraping the barrel on price point so may as well get one that wasn’t as much of an eye sore. These are clean, simple, modern, and much better to look at then the Fios provided router.

The app is simple and intuitive and makes most of the decisions for you. It ran me through the setup very easily. It has parental controls and allows me to prioritize devices as well as setting up a guest network. However, what was most essential to me was the ability to turn off 2.4 or 5ghz signals if I needed to set up a product that only worked on one (usually older products that use 2.4 only). This app is mostly for people that have basic technical skills, but not full on IT networking knowledge.

I chose to replace my Fios router entirely and run ethernet from the Verizon modem (optical network terminal) instead of coax so I didn’t have to run the Fios router in bridge mode. I called Fios tech support and the person switched the feed to ethernet in five minutes. Now I don’t have to rent my router and have much faster internet without relying on bridge mode. If you aren’t comfortable with running ethernet and swapping it out at the ONT, you can use the Fios router and connect the Deco S4 to their router instead. This also allows you to keep your cable box functionality such as guide and on-demand without a MOCA adapter. I have no such plans as I’m dropping cable for YoutubeTV.

On average, my house has around 40 connected devices from Phillips hue bridge/bulbs, Ecobee thermostat, Ring products, several Nest and Echo devices, five smart TVs, smartphones, tablets, and laptops. Don’t buy into the hype that you need wifi 6e. This supports gigabit+ speeds and the dualband is more then enough to maximize efficiency. In addition, you can add or swap out mesh points to this system at any time from any Deco system (E3, M4, M5, P9, etc.). You can literally improve on this system in the future if desired. This was one of the best purchases I’ve made in a while.

Update 2.4.21: I recently switched to 200mb/s from my ISP (it is the lowest package they offer when only purchasing internet). With this, I’ve noticed download speeds at the main router at 270-300 and 300+ upload depending on network traffic. I have seen more noticeable drop-off at the mesh points with this speed, usually 170-230 download and 200+ upload on my first mesh extension node, and 160-200 download on the one in the basement. I also have the biggest variance in upload speeds with this one at 45-120 upload, depending on time of day and network traffic. However this was also the location I had the biggest issue with previous to installing my Deco S4 system. In general, I am still getting amazing speeds, far exceeding what I’m supposedly paying for, extremely stable at every location of my house including the far extremes of my yard. I have can rely on blazing fast reliable internet throughout my house and not have to have wired backhaul to achieve it. However, I can now see why some individuals suffer noticeable drop-off with higher internet speeds at the mesh points. If you figure the drop-off as a percentage and multiply it times the speed, the difference will be more noticeable at the ghz speeds. Overall, love this device, how much faster my internet is and how I am not paying my ISP for their outdated routers they try to dish on unknowing consumers. Best purchase I’ve made in years.