Last Amazon price update was: October 5, 2024 08:48
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
Perfecto Deluxe Chrome Razor & Brush Stand Price History
Price History for Perfecto Deluxe Chrome Razor And Brush Stand NIB
Statistics
Current Price
$16.99
October 3, 2024
Highest Price
$16.99
September 22, 2024
Lowest Price
$16.99
September 22, 2024
Since September 22, 2024
Last price changes
$16.99
September 22, 2024
Perfecto Deluxe Chrome Razor & Brush Stand Description
Great solution for elegant storage of razor and shaving brush
Facilitates air drying for longer brush life.
Weighted base for stability with Rubber like, non-slip sole. IF STEM LOOSENS, POP OUT THE SOLE AND TIGHTEN SCREW. AS, YOU CAN SEE IN THE PHOTO.
Fits most brush and razor models. PLEASE NOTE: Although it fits almost all razors and brushes, it cannot possibly fit every type of razor and brush. PLEASE MEASURE YOUR BRUSH AND RAZOR BEFORE PURCHASING. If it still does not fit, then simply return it to Amazon.(The brush opening is a bit over 1 inch, and the opening for the razor is about 1/2 inch.)
Rubber like, non-slip sole. If the stem loosens ( which sometimes happens during shipping) simply pry off the foam bottom ( with you finger nails or a kitchen knife) and tighten the screw on the bottom! ONLY ONE STAND IS INCLUDED. PLEASE CHOOSE THE CORRECT COLOR BEFORE ORDERING.
Perfecto Deluxe Chrome Razor & Brush Stand Specification
Specification: Perfecto Deluxe Chrome Razor & Brush Stand
Is Discontinued By Manufacturer
No
Product Dimensions
1.5 x 1.5 x 6.25 inches, 7 ounces
Item model number
703610497504
Date First Available
May 30, 2014
Manufacturer
Perfecto
Country of Origin
China
ASIN
B00KO46CTA
Perfecto Deluxe Chrome Razor & Brush Stand Videos
Perfecto Deluxe Chrome Razor & Brush Stand Reviews (9)
9 reviews for Perfecto Deluxe Chrome Razor & Brush Stand
4.6out of 5
★★★★★
★★★★★
7
★★★★★
1
★★★★★
0
★★★★★
1
★★★★★
0
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Sudhir Gupta –
Did not hold ordinary shaver.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
T. H. –
This is a good product. Takes care of my brush and razor.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Tanner Henry –
The stand is well-made, stable and looks good whilst being functional. It comfortably supports my ( King Gillette) razor and brush. It needed no tightening adjustments upon arrival. An unfussy way to tidy up my shaving station.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
D. Parkin –
Good quality, nice finish and looks great. Would definitely buy this item again.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
J. Ashley –
First of all, I have to say that this stand is a great addition to any man’s grooming kit. The stand is made of high-quality materials and is very sturdy, which means that it can hold your razor and brush securely without tipping over. The black finish on the stand is sleek and modern, making it a great fit for any bathroom decor.
One of the best things about the Perfecto Deluxe Black Razor and Brush Stand is that it helps to prolong the life of your shaving brush. By hanging your brush upside down on the stand, it allows the brush to dry properly and prevents water from collecting in the bristles. This not only helps to extend the life of your brush, but it also helps to maintain its quality over time.
The stand is also designed to fit most safety razors, which means that you can use it with your favorite razor and brush combo. It’s a great way to keep your grooming tools organized and easily accessible, which can make your morning routine much smoother and more enjoyable.
Overall, I would highly recommend the Perfecto Deluxe Black Razor and Brush Stand to anyone who is looking for a high-quality and stylish grooming accessory. It’s durable, practical, and will definitely help to extend the life of your shaving brush.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
D. Parkin –
Great product for holding double edge razor and brush. Looks good. Came assembled.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Henry Le Nav –
I am very pleased with this stand. It is well made and holds my brush perfectly. The razor, a two blade Gillette Sensor, will not stay in the stand, but that is not the stand’s fault. The razor has a tapered head and it flips in the slot and falls through. Quick fix, I put two wire ties on the handle of the razor so that the retaining nubs are 180 degrees apart. The razor sits nicely on the nubs. It looks like hell, but works great. Long term fix is to buy a couple of o-rings the correct size and stretch over the razor supports on the stand. The o-rings will hold the razor against the back of the slot. Again these problems are caused by the shape of the razor not the stand.
I have had this stand for only a week, but so far I am quite impressed with it. The stand has a simple mechanical beauty that is reflective of the Bauhaus movement. Simple, functional, yet beautiful. The chrome plating is thick and appears to be well applied. I believe it will resist rusting with the minimal of care. The knurling on the shaft and top nut are precise and functional. All in all it is hard to believe that this stand was as inexpensive as it is.
My only concern is that the soft material lining the base may not resist water for long. The base appears to be solid under this material and I believe it will be an easy matter to replace the lining with an alternate material if it does get water damaged.
An alternate fix for my razor problem would be to buy Merkur Futur razor. That would really make my stand look good, but I am afraid I would hurt myself with the Mekur! The o-ring seems a far cheaper and safer solution. Lest you think me a purist, the brush is faux-silver tipped badger made with synthetic fibers. My wife, an animal lover, would file for divorce if I bought a real badger brush.
EDIT 9-10-15 While looking for something to get my o-ring order over $35 for free shipping (yes I know get Prime), I found a Merkur 38C razor. I think it does a lot to improve the looks of my stand. It turns out I don’t need the o-rings. The Merkur barber pole long handle fits both under the head, or on the handle as shown and looks great.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
J. Ashley –
Stnd s sturdy. Holds my razor and looks good. I recommend this razor holder.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Henry Le Nav –
This is a great stand. It’s sturdy. It works well with a multitude of brushes I own however their branded brush fits perfectly like a glove on the stand.
The stand excels when used with a double edge, razor and the flared ends, keep the flat bottom of the double edge razor from slipping off. However it struggles with some cartridge shavers, such as the Gillette mach3 as when I was using that razor the slightest bump would cause it to turn sideways and slip off the stand. I do not see this as a failing of the stand itself as it will still work with a shaver like a mach3, you just have to be careful with it.
That being said there are others stands with the reverse issue which has grooves to hold a Gillette or Schick cartridge shaver but allows a double edge shaver to slip off with the slightest pump. This particular stand is very secure for a double edge and just about any brush. The stand looks nice, the materials feel nice, and I expect it to last a long time.
Helpful(0)Unhelpful(0)You have already voted this
Only logged in customers who have purchased this product may leave a review.
eBay
Amazon.com
Sudhir Gupta –
Did not hold ordinary shaver.
T. H. –
This is a good product. Takes care of my brush and razor.
Tanner Henry –
The stand is well-made, stable and looks good whilst being functional. It comfortably supports my ( King Gillette) razor and brush. It needed no tightening adjustments upon arrival. An unfussy way to tidy up my shaving station.
D. Parkin –
Good quality, nice finish and looks great. Would definitely buy this item again.
J. Ashley –
First of all, I have to say that this stand is a great addition to any man’s grooming kit. The stand is made of high-quality materials and is very sturdy, which means that it can hold your razor and brush securely without tipping over. The black finish on the stand is sleek and modern, making it a great fit for any bathroom decor.
One of the best things about the Perfecto Deluxe Black Razor and Brush Stand is that it helps to prolong the life of your shaving brush. By hanging your brush upside down on the stand, it allows the brush to dry properly and prevents water from collecting in the bristles. This not only helps to extend the life of your brush, but it also helps to maintain its quality over time.
The stand is also designed to fit most safety razors, which means that you can use it with your favorite razor and brush combo. It’s a great way to keep your grooming tools organized and easily accessible, which can make your morning routine much smoother and more enjoyable.
Overall, I would highly recommend the Perfecto Deluxe Black Razor and Brush Stand to anyone who is looking for a high-quality and stylish grooming accessory. It’s durable, practical, and will definitely help to extend the life of your shaving brush.
D. Parkin –
Great product for holding double edge razor and brush. Looks good. Came assembled.
Henry Le Nav –
I am very pleased with this stand. It is well made and holds my brush perfectly. The razor, a two blade Gillette Sensor, will not stay in the stand, but that is not the stand’s fault. The razor has a tapered head and it flips in the slot and falls through. Quick fix, I put two wire ties on the handle of the razor so that the retaining nubs are 180 degrees apart. The razor sits nicely on the nubs. It looks like hell, but works great. Long term fix is to buy a couple of o-rings the correct size and stretch over the razor supports on the stand. The o-rings will hold the razor against the back of the slot. Again these problems are caused by the shape of the razor not the stand.
I have had this stand for only a week, but so far I am quite impressed with it. The stand has a simple mechanical beauty that is reflective of the Bauhaus movement. Simple, functional, yet beautiful. The chrome plating is thick and appears to be well applied. I believe it will resist rusting with the minimal of care. The knurling on the shaft and top nut are precise and functional. All in all it is hard to believe that this stand was as inexpensive as it is.
My only concern is that the soft material lining the base may not resist water for long. The base appears to be solid under this material and I believe it will be an easy matter to replace the lining with an alternate material if it does get water damaged.
An alternate fix for my razor problem would be to buy Merkur Futur razor. That would really make my stand look good, but I am afraid I would hurt myself with the Mekur! The o-ring seems a far cheaper and safer solution. Lest you think me a purist, the brush is faux-silver tipped badger made with synthetic fibers. My wife, an animal lover, would file for divorce if I bought a real badger brush.
EDIT 9-10-15 While looking for something to get my o-ring order over $35 for free shipping (yes I know get Prime), I found a Merkur 38C razor. I think it does a lot to improve the looks of my stand. It turns out I don’t need the o-rings. The Merkur barber pole long handle fits both under the head, or on the handle as shown and looks great.
J. Ashley –
Stnd s sturdy. Holds my razor and looks good. I recommend this razor holder.
Henry Le Nav –
This is a great stand. It’s sturdy. It works well with a multitude of brushes I own however their branded brush fits perfectly like a glove on the stand.
The stand excels when used with a double edge, razor and the flared ends, keep the flat bottom of the double edge razor from slipping off. However it struggles with some cartridge shavers, such as the Gillette mach3 as when I was using that razor the slightest bump would cause it to turn sideways and slip off the stand. I do not see this as a failing of the stand itself as it will still work with a shaver like a mach3, you just have to be careful with it.
That being said there are others stands with the reverse issue which has grooves to hold a Gillette or Schick cartridge shaver but allows a double edge shaver to slip off with the slightest pump. This particular stand is very secure for a double edge and just about any brush. The stand looks nice, the materials feel nice, and I expect it to last a long time.