Zerex Asian Vehicle Blue 50/50 Prediluted Antifreeze

Coolant color is pinkish red which is close to the new pink coolant that comes with the Hyundais.

Have used it in all my Asian cars and motorcycles for years, no problems. If you need green, get this stuff it works great.

Most people think all coolants are the same. They are for most of the ingredients; however, corrosion inhibitors is what makes them different. Really old vehicles had fewer differences but as coolants went organic the options increased. Organic for coolant provides longer life and better protection in modern vehicles. Color alone isn’t an indicator of correct fluid, context matters. Asian green vs America greens target vehicle designs and engine alloys like all coolants. American vehicles have silicates in coolant that can coat the walls of an asian engine insulating heat transfer, damage a water pump, damage thermostats, etc… I believe if I remember correctly that mixing those two could cause the coolant to gel up. If not those two there is a mix that can do that. Both are green but very different. Typically user manuals list engineering standards such as ATSM or JASO followed by a number and occasionally list what to avoid. This can be confirmed on the bottle, but take it a step further and go to the website. The technical or specification papers for product info usually lists these standards and what cars are compatible. There are some brands I don’t trust to properly list compatibility, but I’ve seen no issues in Zerex for Asian vehicles. Many may share ATSM standards like the Red, Blue, and Green Asian. Asian blue & green are practically the same but blue has a longer life. Red is typically for specific car brands. Theoretically you could convert green to blue concerning Asian. I would personally do 4yrs 60k for blue and not the 150k advertised. While many people mix types and brands, it is not recommended. Each Individual blend meets engineering standards through likely a specific mix of chemicals. Two equivalents may reach specified standards through a different formula or they may have identical recipies. Without that information we can not be certain. Mixing brands & types could diminish original effectiveness of the blend. I flush a system clean with distilled water before I switch to a new coolant brand. This is why I will be putting this brand in a friend’s vehicle so he can run into a store to find this if he needs to top it off in an emergency rather than waiting on Amazon. Amazon is cheaper if willing to wait. At this point Amazon backed out of many warehouses to save on storage and orders are delayed as it isn’t always on hand or some complications with items of more than one count can occur. Prime doesn’t mean much for many orders nowadays when they don’t actually have it in warehouse. Order here to get it cheap and elsewhere to get it on time. I’ll likely be going through another vendor next time my project is time sensitive. My friends vehicle is stuck in my driveway as Amazon is a week plus behind on the order. The product though is made by a reputable company. I noticed a post where someone had a slush. I suspect it was a bad batch, it was in their truck for a long time, or something while in their posession compromised it. Freezing point in the specifications is I believe-34f so for it to freeze at 7f means something more is going on. Went into two forums to solicit that picture and inquire and one guy said he has had a jug in -33f and it did not freeze. Now I normally use a different harder to get brand for my vehicles just because that’s what I started with years ago and I don’t like switch up brands/products on my vehicle. My motorcycle Kawasaki makes a green specifically for the all aluminum block so I use that since it is either just a green PHOAT and no big deal or potentially they have engineered something really great for the aluminum engine like they claim. Otherwise, I stick to my other brand. That said I have faith in Valvoline Zerex, and rest assured as long as you match the correct product to your vehicle and bleed the air from your coolant system then you should be fine. I may start using them myself because they are easier to get a hold of normally.

Update: Amazon couldn’t even get it to me at all except for 1 jug… off to the stores to try and find it locally. FYI, I am by a major city. If they can’t get it to me then you are screwed.

De las mejores opciones para autos de todas las marcas asiáticas que necesitan una fórmula P-HOAT listo para usarse.

Pink oem style coolant. Works well.

Does exactly what it should. Used it to top up my 2007 Toyota Camry XLE