Zetunlo 21000Lumen LED Work Lights With Stand

Received in a basic cardboard box. Instruction guide for installation is pretty basic – not much help. A couple of pointers:
1) Use the black spacers on either side of the central light.
2) There’s one long knob; hold that to the side for installing the central post that the lights connect to. Connect the lights to the central piece first, then install. Make sure that the cords are tucked behind the legs (you may need to use the included allen key to losing the nuts to move the mounting brackets).

Overall: Lightweight and very bright. Light is brilliant white – not for use for photos as it’s a ‘cold’ tone, but great for looking at things and getting consistent, even illumination.
2) Stand is easy to assemble, and definitely lightweight. I’ve used other halogen bulb light stands, and this one is about a quarter of the weight, and doesn’t have the risk of scalding you on the bulb enclosure.
3) Not great for low-down illumination – the stand is best for heights above 3 or 4 feet, and goes to at least 6′ or so. Good for overhead to down illumination needs, bad for ‘ground up’ needs. The LED lights screw on and off, but are all hardwired together so you can’t take it apart and use them individually. They all turn on and off individually, but the cables are connected.

If you need easily mobile shop illumination with a pretty easy setup, this is a good product.

This light is very solid for the price. I was looking for a work light, and didn’t want to spend a bundle so, after reading multiple review, I settled on this one, and I’ve been very happy with my purchase.

Assembly is quick, and though I was a little worried about the very fine threads on the tubing, it went together mostly smoothly, and without cross-threading. Just be gentle when you put it together for the first time.

I’ve used this light a total of 40 or 50
Hours since I bought it (I’m working on a project where there is no light source, so this is what I’m using, and so far I have had no issues.

Yes, as others pointed out, the LEDs do stay on in a very dim state when the unit is tuned off, but this is due to leakage current coming through the LED drivers: and isn’t a concern. It’s only just bright enough to tell they aren’t completely shut down.

All in all, I’ve been very pleased, and the only suggestion I’d make is that you’re really careful when assembling the tubing to mitigate the risk of cross threading the fine, and if I’m honest, somewhat shallow machine threads.

I took this lamp camping and connected it to the truck battery. I stood it up to about 7 feet high and it lit up the entire forest around me. Like… daylight bright. Very nice. During this trip it was knocked over a lot. From 7 feet high. And the lights still burn bright. No issues at all with the performance. So…. I like it. Great job making a good product for a clumsy man.

Packaged nicely, easy to assemble. Overall very bright also! The one odd thing is there are 3 lights on the cross bar, and each light is labeled as 70W. The three lights are powered by a single plug, though you can turn them on/off individually. With all lights on I plugged the light to a watt-smart device and it listed the power draw as only 150W. You would think with three 70W lights it would pull ~210W….

So I think they are cheating on what lights are actually on there, but it’s still bright enough and pulling less power than listed is better than pulling more power I suppose.