D’Addario XL Nickel Half Rounds ENR71 Strings

I have been a roundwound player for 90% of my time playing bass. 10% of the time was flatwounds, and while I liked them, for some things they were just too dull or were missing something depending on the song or style of music. I decided to give these a shot, as I’ve been curious about them for a few years, and I’m not sure why I waited so long to do that!

The feel of the strings is very different. When people say these strings have a “sticky” feeling to them, they’re not wrong. Its the in-between of having a round and flat that is a bit confusing, since its not totally rigid like a roundwound string is, yet it isn’t completely flat like a flatwound. It took me a few days to really get used to the feel, but once I did I found I really liked the feel and vibe of what I’d say is an extremely broken-in and old bass string. The fact that fret noise is largely taken out of the equation is also very nice. There is a slight increase in tension, but again, once you get used to that, it really isn’t a problem.

I did have to tweak my amp and pedals a tiny bit to accommodate for the slight volume difference, which was mostly due to me changing the way I was playing but also the strings themselves (acoustically) being a tiny bit quieter. They are a pretty mellow string, but don’t lose too much with the brightness. To my ear, its a perfect balance. With the band I gig with, we mostly play pop/alternative rock and r&b/rap. For that gig, these are great, but when I’m playing at home I’m either playing sludge/stoner rock or some kind of poppy jazz. These strings are great for all of those, and the sounds that the strings produce work extremely well with overdrive and fuzz. The strings also retain a nice brightness if you are someone who plays with a pick (I tend to go back and forth depending on what I’m playing).

They’re pricey for sure, but much cheaper than flats, and I think over time as I break them in more these will still sound great. I don’t foresee me really going back to playing roundwound strings on bass for any reason.

Compré estas cuerdas D’Addario del tipo “half-round” porque me gustan los tonos suaves, y las “half-round” te dan la suavidad de las “flatwounds” mezclado con el brillo de las “roundwounds”. Ya instaladas en mi bajo eléctrico, las cuerdas se hicieron notar de inmediato. Son muy cómodas para tocar, los dedos se deslizan mucho más fácil que con las “roundwounds” y produce unos tonos suaves pero con mucho cuerpo. Mi bajo es de 5 cuerdas y la cuerda que mejor tono tiene para mi gusto es la “B” pues tiene un tono profundo con muchísimo cuerpo y que hace que todo retumbe, sin perder un gramo de control en el tono. La verdad recomiendo mucho estas cuerdas a pesar del precio que es alto para el estándar de cuerdas. Espero duren mucho porque es un placer tocar con ellas.

I put these on my main gigging bass, a Harley Benton Enhanced MP-5MN, because I was getting a lot of finger buzz. These strings feel great! No more buzz from sliding up the neck. They’re not as bright sounding as roundwounds but not dull like some flatwounds, either. These are a great middle ground for anyone like myself who only previously played roundwounds.

The product was presented so bad, , for the price i paid for Rs 4500… they dont have a refund option.. the product was worn out and cello taped . I have also request for a 5 string and not 4 string.. I have not touched the product and requested a refund but they faild to accept my retun. … Very disappointed and dissatisfied..

I’ve tried half-rounds for guitar about 30 years ago, but not for bass until now. I’m actually impressed by their feel and sound. They’re pure nickel strings, so they feel very close to the pure nickel flats I typically use.

Montate su basso fretless.
Avevo paura di rovinare la tastiera montando corde ruvide.
Hanno per me il Suono “giusto” e gestendo i pick up con un po di EQ si possono raggiungere suoni alla Jaco o più scuri tipo mowtown.
Riacquisterò.
Grazie

Bottom Line: These strings truly do have most of the smooth playing feel of a set of flat wound strings, though not completely as smooth. (The outer winding surfaces were made as normal round wounds, then the outer surface was ground down until the surface was flat-ish.) Yet the tone of these strings retain a noticeable amount of the brightness and overtones of round wound strings. The best of both worlds on a bass if you ask me.
Very Important!: These medium scale strings fit my Hofner Club bass perfectly. The heavily wound portions of the strings run from below the archtop’s floating, rosewood bridge and then, just past the nut of the bass, these strings quickly taper down to where they DO fit into the holes of the guitar tuning pegs Hofner uses on its basses. The E string’s taper at the top is just enough that it fits snugly into the E tuner’s post hole. The other strings, of course, fit into their tuners with more ease. This bass is a joy to play, and the feel and tone of these strings have increased my enjoyment of playing it.
I was given a Hofner Ignition Series Club Bass for Christmas, though I got it early. The Club bass is made in the same manner of hollow body construction as its more famous Hofner Violin or “Beatle” bass brother, only the Club bass uses the same Les Paul-ish shaped, single cutaway body as the Hofner Club guitar. The natural tone of these hollow body basses has a distinct thuddy, woody character resulting in a tone more akin to the tone of a large acoustic double bass than does any Precision or Jazz bass. These Hofner basses are 30 1/4 inch scale (15 1/8 inch from nut to center of twelfth fret) basses for which there are notoriously few choices of string sets because of the extra string length needed from the bridge to the trapeze tailpiece. I have wanted a Hofner Club bass for over twelve years (when I first laid eyes on one of these sunburst beauties being played by Kurt Smith of Tears for Fears) and I finally got one; even if it is the $350.00 Chinese version rather than the $2300.00 German original. (The bass’s manufacture, finish, and workmanship are simply amazingly close to perfection! I’m truly impressed with the workmanship.) However, I really liked the sound of this Club bass with the included round wound strings. Sadly, the winding end of the factory strings were coming unwound somehow and the A string broke at the tuner, necessitating this string purchase. On my other bass I have long used a set of D’Addario ENR71 “Half Round” bass strings and love them. If the Hofner Violin and Club bass users on the bass forums are to be believed, the vast majority of new Hofner bass owners immediately on delivery remove the round wound strings installed in the factory and replace them with LaBella or other brands of flat wound strings. I guess the idea is to get as close to Paul McCartney’s unique thumpy bass sound as possible. I’m different, and am loving the thumpy AND bright overtones, and feel of these D’Addario ENR71M medium scale strings on my new short scale Hofner Club Bass.