Cooler Master H500M ARGB Airflow ATX Mid-Tower
Original price was: $259.99.$169.99Current price is: $169.99.
Cooler Master H500M ARGB Airflow ATX Mid-Tower Price comparison
Cooler Master H500M ARGB Airflow ATX Mid-Tower Price History
Price History for Cooler Master MasterCase H500M ARGB Airflow ATX Mid-Tower with Quad Tempered Glass Panels, Dual...
Statistics
Current Price | $169.99 | October 27, 2024 |
Highest Price | $169.99 | October 17, 2024 |
Lowest Price | $169.99 | October 17, 2024 |
Last price changes
$169.99 | October 17, 2024 |
Cooler Master H500M ARGB Airflow ATX Mid-Tower Description
- Four Tempered Glass Panels : Edge to edge glass side panels on both sides, a glass top panel, and a glass front panel offer a clear and comprehensive system view
- Glass & Mesh Options Included : Choose between the glass front panel for a balance of aesthetics and performance or run full mesh for optimized airflow with the included accessory
- Rich Connectivity : The I/O panel comes with a USB 3.1 (Gen 2) Type C port, and 4 additional USB 3.0 ports.Body material:Steel
- Covers For Clean Building : A total of 9 covers take clean building to the next level with a PSU cut out cover that provides the option of showing off your PSU or leaving it out of sight
- Two 200 millimeter Addressable RGB Fans & Controller : Move air stylishly and quietly with 2 Addressable RGB Fans controlled by an included ARGB controller
- Expansion Slots: 7 Plus 2
Cooler Master H500M ARGB Airflow ATX Mid-Tower Specification
Specification: Cooler Master H500M ARGB Airflow ATX Mid-Tower
|
Cooler Master H500M ARGB Airflow ATX Mid-Tower Reviews (9)
9 reviews for Cooler Master H500M ARGB Airflow ATX Mid-Tower
Only logged in customers who have purchased this product may leave a review.
Luis Fernando Aguiar –
This is the first time I have spent over $100 on a computer case, this replaces an old Cooler Master HAF case from 2012. This case is pretty awesome! Not sure what happened with the guy who screwed up the side panel in one of the other reviews as everything came apart easily. Just be sure to have plenty of room and organize your area before building your system. Using an Corsair H150i Pro with the radiator mounted up top.
Great airflow and temps on my overclocked 9900K are lower than before. Very happy. Super fast delivery as it arrived a day earlier than expected. The RGB is cool AF as well. Highly recommended.
PuterGeek2 –
The media could not be loaded.
Tempered glass fans, rejoice! If you love showing off your rig, this case is for you. I have spent a ton of money over the past several months to complete my dream rig. After four failed attempts at finding the perfect case, along comes this beauty.
The price is very reasonable for such a high quality product. This thing is built like a tank, easy to clean and has a ton of space for even the largest motherboards out there. Airflow is silly good! The included argb fans are simply amazing. (see video)
This beauty holds inside an ASUS ROG STRIX X570 motherboard, R9 3900x cpu, ASUS ROG STRIX 2080ti, 32 gb Patriot Viper RAM @3200 MHz, TT 750 Toughpower Grand PSU (Gold) DEEPCOOL captain rgb 240mm AIO, 2 TB Sabrent Rocket Nvme ssd (gen 4) and of course two 2 terabyte platter HDDs for storage.
All that out of the way, there is still plenty of room to add whatever shiny add ons you may want to include.
I love this case… have had it for six months with zero issues. If you have any questions, I would love to answer them.
Pros and cons!
Pros: Shiny, Pretty, Spacious, easy to maintain, Built to last, also easy to build in.
Cons: Um yeah, none.
Although this is a “niche” pc case, I assure you if bling is your thing… this is your best and only option.
john –
Compre este producto recomendado por varias paginas web.
Lacalidad de los materiales me pareció muy bueno, viene muy bien en la caja, un aspecto muy bonito y de mucha calidad.
Es muy bonita, y amplia, entran muchas cosas perfectamente, las luces led muy bonitas.
Lo recomiendo 100%, una de las mejores cajas del mercado actualmente para ordenadores tope de gama.
Khalid –
Produtos da Cooler Master são os melhores e não poderia ser diferente com o H500M
anndmsantos –
The media could not be loaded.
Here’s my PC configuration
– ASUS Z490 Motherboard
– Intel Corei5 10400
– Nvidia RTX 2070
– 32 GB RAM
– Deep Cool AIO Liquid Cooling 360mm radiator. Installed on top (see attached pictures)
Overall the case looks nice, alot of cool air intake and plent of space for adding 360mm radiator on the top. You also have the choice to either let the radiator fans over the top panel or under. I chose to go over because the fans were not giving me clearance with the motherboard’s heatsink. In that case I installed the three 120mm fans over the top panel and screwed them on the radiator.
The cable management on the left panel is easy to manage even though I had a 1000W power supply from Zalman since 2009. Manufacturer claims that the allowed clearance for power supply is 200mm, while mine is 220mm and fitted perfectly!
Maxelmusic –
Ich war für meinen neuen PC auf der Suche nach einem Gehäuse das ordentlich Platz bietet, ohne dabei zu protzig zu wirken. Viele Gehäuse versuchen mehr zu sein als sie sind und lassen einen das auch am Preis spüren. 200€ fand ich für ein Gehäuse dieser Grösse und Ausstattung allerdings vollkommen angemessen.
Es kam wesentlich früher als angekündigt was mich natürlich gefreut hat.
Beim auspacken merkt man direkt, dass man sich Gedanken gemacht hat; wer schon mal alleine ein Gehäuse aus dem Karton geholt hat, weiss wie schwer das sein kann. Besonders dann, wenn das Gehäuse so viel wiegt wie das Cooler Master H500M.
Als Lösung wurde das Gehäuse samt Umverpackung in eine Tasche gesteckt, so dass man es auch alleine wunderbar einfach aus dem Karton holen kann.
Das Gehäuse selbst ist wirklich massig und durch die rundum-Verglasung sieht es extrem edel aus. Das Frontpanel bietet mehr als genug Anschlussmöglichkeiten und wirkt wie der Rest sehr hochwertig. Das Innenleben ist gut durchdacht: die Kanäle bieten genug Platz für alle nötigen Kabel und dank der abnehmbaren Blenden sieht sogar die Rückseite wirklich ansprechend aus, was meiner Erfahrung nach recht ungewöhnlich ist.
An einer dieser Blenden wurde der RGB-Controller angebracht. Die Lüfter sind bereits damit verbunden und man muss man das ganze nur an Mainboard und Netzteil anschliessen.
Die Farben der Lüfter können dann über einen kleinen Knopf am Frontpanel durchgeschaltet werden, dafür verzichtet das Gehäuse standardmässig auf einen Resetbutton. Wenn man ein Board mit entsprechender RGB-Unterstützung (z.B. Asus Aura) verbaut hat, kann man den Schalter aber auch einfach ans Mainboard anschliessen um einen Resetbutton daraus zu machen.
Wie in der Beschreibung zu lesen ist, hat man die Wahl zwischen zwei Fronten: gehärtetes Glas oder einem Mesh. Was nicht in der Beschreibung steht, ist dass das Mesh noch ein zweites, kleineres Gitter im innern hat, was möglicher Weise als Staubfilter fungieren könnte. Ob das wirklich was bringt, kann ich aktuell noch nicht sagen. Ich hab mir zur Vorsicht noch extra Staubfilter dazu bestellt.
Ich habe weder eine Wasserkühlung, noch zusätzliche Lüfter verbaut. Trotzdem reicht der Luftstrom der beiden 200mm Lüfter aus, um meine Hardware (Ryzen 7 3800x, RTX 2070 Super, NVME M.2 ohne eigene Kühlung) auch unter Vollast kühl zu halten.
Eigentlich hätte ich noch einen Stern abziehen müssen, da der Anschluss der Audiobuchsen bei mir ein loses Kabel hat und dementsprechend nicht funktioniert. Ich habe nicht vor die Buchsen zu nutzen und weiss mit Sicherheit, dass das Gehäuse ohne Probleme ausgetauscht worden wäre, ich wollte aber nicht noch länger mit dem Zusammenbau warten müssen.
Ich bin vollends begeistert und würde das Gehäuse uneingeschränkt empfehlen.
Lee Haddix –
Love this case. Allot of room for any components. Up to E-ATX MB. Can Fit any RTX 4000 Series Card. I got the Cooler Master Vertical Mount Adaptor for my build. Very good build quality. Love that they include both glass and mesh front panel. Love the number of inputs for USB on the front of the case. I replaced all the fans with Corsair Corsair iCUE LINK QX Fans, 3 x140mm at the front, 1 x 140mm at the rear, CORSAIR iCUE Link H150i LCD at the top. MSI RTX 4070 Ti. BeQuite Dark Power 13 1000 watt. Asrock X570SPGRIPTIDE Mb Asrockx570s Pg Riptide. G.SKILL Trident Z RGB Series (Intel XMP) DDR4 RAM 64GB. All fits without issue and plenty of room. Great air flow. Everything running cool and quite. I would recommend this case to anyone.
Khalid –
No se dejen llevar por el titulo es grande solo que aparenta ser mas grande de lo que es, en mi caso instale un custom watercool para cpu y gpu y apenas logre que entrara PERO por que las piezas son grandes en mi caso es un radiador de 360mm con el doble de grosor de un radiador normal y un combo de bomba y deposito grande e thermaltake el mas grande que tienen, por eso para mi fue posible pero problemático de instalar todo pero para instalaciones mas comunes es perfecto y es hermoso el vidrio templado es exacto para dejar pasar el rgb de manera hermosa y dar una imagen mas oscura al estar apagado sinceramente NO PUEDES ARREPENTIRTE DE COMPRARLO.
PuterGeek2 –
I’ve happily used Cooler Master cases since the HAF, but was disappointed with the H500’s airflow when I switched to it in 2017. However I’m glad to say Cooler Master regained their footing with the H500M. It keeps my favorite things about the H500 design, and greatly improves several shortcomings I had to deal with. The top panel no longer sits loosely on the case so if I needed to carry the case out, I can do so without having to take it apart or worrying about dropping it. The top radiator/fan mount is now 360mm instead of 240mm max so I was able to mount a larger radiator for cooling. It has a USB C port on the front, FINALLY. There’s even a discreet built in GPU mount for the saggiest of video cards. But most importantly of all, this thing is an AIRFLOW BEAST. 10900k at 5.2 sits around 50c on full load, 3080 doesn’t go past 65c on full load. With the newest GPUs pulling so much power it’s more important now than ever to get a good airflow case. If you liked the style of the H500 but were turned away by lack of airflow, the H500M is the case for you.
My one con, if I had to say something, would be that although it supports EATX just fine, the cable shroud you would usually tuck your 24 pin behind sits flush with the side of the 24 pin terminal on my motherboard, at least. I was able to route my 24 pin extension around to the other side of the shroud in an aesthetically pleasing way so no real issues. Just keep that in mind.
Other things about this case worth mentioning:
The dual tempered glass side panels make this case heavier than normal but it gives it a nice symmetrical look and sheen. You won’t have to worry about errant cords being visible through the glass because with the entire H500 line there are several wire panels that hide your mess, keeping that nice clean look no matter how much your cable management sucks.
The top panel is still not meshed except for side vents but there is noticeably more headroom between the case frame and top of the panel allowing for excellent exhaust flow.
The two front 200mm fans are markedly improved from their H500 versions, with more LEDs and quieter bearings.
The PSU and HDD shroud below can be configured in many ways, but if you have a 360 radiator for the front intake and want to keep the shroud, there is fortunately a slot that pulls out from the front enabling that particular configuration.
It’s listed as a mid sized tower and it is, but the H500M is large for its class. Roughly 22 inches tall, 21 inches deep.
Its main feature is excellent airflow, but the H500M should be noted as being a very modular case, and can accommodate many kinds of builds. I was almost tempted to go custom loop because of the built in pump bracket and space for two 360 rads.