Klein Tools Multi-Bit Stubby Screwdriver, Impact Rated

Perfektní zpracování šroubováku. Všechno krásně pasuje. Rukojeť je měkká a dobře se drží. Je krásný.
Za ty peníze je hodnota šroubováku. Nelituji koupě a těším se až ho budu používat

Good as a versatile driver. Reasonably stubby, but you will need to have shorter alternatives available for very small spaces. You have 3. Different lengths with this design, and you can put other bit holders in this handle, I have a longer holder of a different brand that works well in this handle. I believe that Klein has some other options that would also work. The grip is rubber and allows for a good firm grasp. The bits it holds in the handle are shorter than standard. So try not to lose them. I don’t care for that, the holder itself does work with standard 1/4 inch. And I have used it in a drill. Handy to have around. Overall a good product

A great tool to add to your kit! If you bought this when it was still attached to the display card you’ll know it’s features……….But if not here they are:
A) A 3-position shaft for positioning @ 7/16″ intervals from “stubby” to medium length
B) A rare earth magnet inside the hex-bit holder for securing the bits in place (comes with 1 bit inserted)
C) A hex-bit storage compartment inside the handle for 6 bits (for a total of 7 bits)
I don’t know if it was intended or not but I find that leaving the storage cap extended open it serves
as a longer handle.
The bits are secured and don’t fall out.
On the negative side – I find the handle diameter a little oversized (due to the storage compartment), and a wee bit short in length. See comments above.
On the plus side – This is an excellent tool – well designed, machined, and assembled, and well up to the Klein standards I have come to expect!!!! Best Regards James Clarke, Hilton, NY

I have no trouble getting the bit storage compartment open, unlike some reviewers. Maybe my fingers are stronger, or maybe theirs was defective, I don’t know. I also can pull the bit out of the end just fine; the magnet is definitely strong, but I see this as a good thing. The magnetic field is conducted through the bit well enough that it can hold a small screw pretty well.

I do find it a little difficult to pry the bits out of the storage compartment, but I manage. It’s nice that they won’t fall out accidentally.

I would have preferred a #0 Phillips bit instead of a #3. The packaging actually says it has a #0, and I said “Cool!” when I saw that, but it turned out to be wrong. The online description is correct. I might try to find a #0 bit that will fit in the compartment (these are very short bits), but I’ll probably never bother.

The adjustable length works well, once you figure out that you have to push in the little plate at its base, similar to a quick-release drill chuck. You can also remove it and put a bit directly in the handle, if you want it even shorter, but the bit isn’t held in place. I thought maybe it would stay in place if I clamped it in by pushing on the plate, but then pushing on the bit can push it all the way in – don’t do that! I’m not sure how hard it would be to get out again.

This screw driver is perfect for tight places. I love the ratchet feature, especially in those hard to reach scenarios. This tool is holding up nice throughout the many projects I’ve used it on. The extendable shaft and bit storage are great features. Klein makes a great tool. The rubber grip on this tool is comfortable.

Du solide