Antec NX200 M Micro-ATX Mini-Tower Case
Set Lowest Price Alert
×
Notify me, when price drops
Set Alert for Product: NX200 M, Micro-Atx Tower, Mini-Tower Computer Case with 120Mm Rear Fan Pre-Insta - $112.99
Newegg
Newegg Business
Walmart.com
eBay
Amazon.com
Price history
×
| Price history for NX200 M, Micro-Atx Tower, Mini-Tower Computer Case with 120Mm Rear Fan Pre-Insta | |
|---|---|
|
Latest updates:
|
|
Last Amazon price update was: September 16, 2024 12:39
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
Antec NX200 M Micro-ATX Mini-Tower Case
$112.99
Antec NX200 M Micro-ATX Mini-Tower Case Price comparison
Antec NX200 M Micro-ATX Mini-Tower Case Price History
Price History for Antec NX200M Micro-ATX Tower, Mini-Tower Computer Case with 120mm Rear Fan Pre-Installed, Mesh...
Statistics
| Current Price | $59.99 | August 26, 2024 |
| Highest Price | $59.99 | August 26, 2024 |
| Lowest Price | $59.99 | August 26, 2024 |
Since August 26, 2024
Last price changes
| $59.99 | August 26, 2024 |
Antec NX200 M Micro-ATX Mini-Tower Case Description
- Motherboard support: Up to M-ATX
- 2.5″ SSD: 1
- 3.5″ HDD / 2.5″ SSD (Convertible): 2/1
- Graphics Card Support: Up to 275 mm
- CPU Cooler Support: Up to 150 mm.PSU Support: Up to 150 mm
Antec NX200 M Micro-ATX Mini-Tower Case Specification
Specification: Antec NX200 M Micro-ATX Mini-Tower Case
|
Antec NX200 M Micro-ATX Mini-Tower Case Videos
Antec NX200 M Micro-ATX Mini-Tower Case Reviews (13)
13 reviews for Antec NX200 M Micro-ATX Mini-Tower Case
Show all
Most Helpful
Highest Rating
Lowest Rating
Only logged in customers who have purchased this product may leave a review.
Carlos Enrique Vargas González –
Acheté pour un petit PC de bureau micro-ATX. Bonne qualité de fabrication, rien à dire. Facile à installer dedans. Plutôt joli en plus.
138 –
mATX form factor is already a standard that doesn’t get a lot of love. It’s annoying to me when case manufacturers design mATX cases that don’t feel significantly smaller than standard ATX. This case, on the other hand, is perfect! It condenses an mATX PC into the minimum size while still supporting a wide variety of coolers and graphics cards. The case doesn’t look or feel super cheap to work in, despite being very inexpensive.
It’s a much tighter fit than even the average mATX case, so be aware of that. Double check graphics card, cpu cooler, and fan compatibility before buying. I actually cannot remove my graphics card without removing the CPU cooler, which is a bit annoying, but nothing I’d avoid buying the case for. I own graphics cards that do not fit in this case, so be careful.
It has pop-out pcie covers which I generally hate, but I wouldn’t pay even $10 more to avoid that.
Amazon Customer –
The media could not be loaded.
One of the best cases I’ve ever built with, that’s my 2nd mATX build and I love it. Great performance, airflow is not an issue! Compact powerhouse and the front panel design just makes it the case 👌🏻
Highly recommended!
O. Asghar –
This case is great if you can get for $50 or less. It provides ample airflow through its mesh front and room to mount plenty of fans. Installing ARGB Fans will make your case look great. I am not a fan of the hinged side panel but I can see the appeal it may have for some. The side panel is easy to open to easy get to your components. The power supply basement has decent room for most power supplies like Thermaltake Smart series, EVGA W or BR series, Aresgame, and other brands. The Sama 550W would be a close fit.
franco –
Excellent case for price. Was able to get this for $67 CAD +tx
155mm thermalright peerless assassin cooler fit despite case specs saying max size 150mm cooler.
This case is very, very tight. Install fans and air cooler last if you have a large one.
Evan –
You will get exactly what you are paying for. The case is simple but very functional. If I were you, I would wait for a good promotion to buy. There are several comments talking about this cpu tower. I’ll give it 5 stars even though it comes with a small dent. which is not very noticeable, I believe it was not the company’s fault but rather the delivery’s. I liked the cpu tower, which is small, functional and beautiful.
JeanleRoi –
the MB for one assembly was a bit too pushed in. Maybe I need some kind of washers to have risers abit higher. The quality is OK. it is not phenomenal like some pricey cases but is adequate, no sharp edges, but the front plastic feels a bit cheap because it has plastic posts that do not have any type of clip mechanism to push or press to remove. Removing the front was a bit tricky. I was trying to push the posts/pins on the inside of the case out but I had not really put much pressure and the pull on the front of the panel easily removed it then. That part seems flimsy but in reality is holding together well. Standard power supply sized space it looks like.
Glass door comes off by pulling up all the way. Good routing holes for cables. USB cable for USB C has an indent and once on the MB, if the socket has a lock it will not come off, i did not know that and pulled it off and the socket came off the mother board. I was only trying to reroute the cable. So connect correctly the first time. I had to align the pins carefully and push the socket over the pins on the MB. Works fine.
One 2.5 SSD spot and a drive bay that could take two 2.5 SSDs on adapters or one HDD 3.5 and one 2.5 SSD with adapter. The photos show that Antec logo is on the left side which is bigger than the right, in fact, the two sides are identical and symmetrical. The photo is wonky. Too many holes on top there is concernt for dust accumulating faster. Fits M-ATX and ITX boards NOT regular ATX. Easy connect USB 3 ports. space for fans as indicated in manufacturer description.
CONS: no 5.25 drive bay for a DVD/BD. for that we need to upgrade to a mid tower I guess.
More: I had originally ordered and received a different case that had acrylic window/panel. I returned that and bought a second Antec case. I had an Antec large tower in 1999/2000 and hence I knew the quality would be good. Not as good as 1999, But companies have figured out that his is all we need, less material, lighter, but still practical and usable. Enough screws and risers for installing the MB and drives. the 2.5ssd bay is plastic, works ok, but feels flimsy. But works fine. No need to waste metal in manufacturing.
Ralph Richardson –
Nice style, like the easy access.
Got cut by internal edges.
The topside USB ports are loose and devices stop working intermittently.
Didn’t pay much so OK.
Robson Martins –
Llegó antes de tiempo, bien protegido y sin ningún daño aparente, para computadoras de bajo perfil o gama media es una buena opción por la ventilación y el espacio que tiene, a pesar de ser de plástico en su totalidad se siente rígido .
JeanleRoi –
Bought this case to house my pc build! I should have bought modular power supply.
I had way more connectors than l needed. Space was crowded. My previous case was an ATX, tons of room!
The motherboard, ram, graphics card, SSD, all fit comfortably! Well ventilated and room for more fans!
Amazon Customer –
Airflow limite si configuration chauffe un peu.
Drizzt –
I built my first computer in this case and went with an m-atx build over itx because I wanted to suffer, but not too much. Build quality is very good, all the corners are smooth and the metal is sturdy. The issues I have are with the punch-out pcie covers that require you to wrestle and snap them off of the case as opposed to unscrewing them. Also, top fan clearance is only possible if you use slim fans or maybe have an itx board (for you crazies). Overall, it’s a very nice case for the price, ample space for all necessary components and openings for cables. The magnetic glass panel door is also a great touch 🙂
138 –
TL;DR — excellent case for a normal build
After the first time I made a build with this case, I knew it was good. I have since bought 4 more.
The removable glass door is both functional and attractive. It makes for very easy access.
The right side removable panel is easy to get off and on as well.
The case has a great place to stuff extra long cables, making cable management easy.
The included case fan is plenty for an average build, so I didn’t need to add anymore.
The bottom mounted power supply provides stability for the whole case.
The only issue there is a limited space for the power supply fan. A high-powered PSU might need more room to breathe, however that wasn’t an actual problem I faced.
The SSD mount was a little tight fitting in the drive, but not a big deal either.
I built machines for some offices, so a GPU was not added. Therefore I can’t speak on how well one would fit.