Price history for Greenlee 7310SB 11-Ton Hydraulic Knockout Punch Kit with Hand Pump, Ram, 1/2" to 4" Slug-Buster Punches, Dies, and Hydraulic Draw Studs, Electrical Conduit Hole Cutter Kit
Latest updates:
$1,499.00
- October 31, 2024
$1,708.24
- October 25, 2024
Since: October 25, 2024
Highest Price:
$1,708.24
- October 25, 2024
Lowest Price:
$1,499.00
- October 31, 2024
Last Amazon price update was: October 31, 2024 02:18
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
1/2″ – 4″ HYDRAULIC KNOCKOUT KIT: Features a new die design optimized for the widest range of materials to punch precise holes in up to 10-gauge mild steel, 12-gauge stainless steel, aluminum, brass, copper, fiberglass, and plastics
ERGONOMIC DESIGN: Compact, lightweight design offers portability and quick, easy 1-person operation, and knurled edge on punches provides a better grip
EASY THREADING AND REMOVAL: Eliminates cross-threading by drawing studs with the dog point tip, and hex key access allows for stud easy removal from the tool
CARRYING CASE: Includes a 746A ram, 767 hand pump, 1/2″ to 4″ Slug-Buster punches, 2-1/2″ to 4″ standard round punches, 1/2″ to 4″ dies, 7/16″, 3/4″, and 1-1/8″ hydraulic draw studs, and a case with markings for easy part identification
COMPATIBILITY: Works with all Greenlee knockouts and has same draw studs used with Intelli-PUNCH, LS50L2, and 746A ram
Goods manufactured by Greenlee will be free from defects in workmanship and material for a period of one year from the date of user purchase, provided such goods are installed, operated, used and maintained in accordance with Greenlee's written instructions.
13 reviews for Greenlee 11-Ton Hydraulic Knockout Punch Kit
4.9out of 5
★★★★★
★★★★★
11
★★★★★
2
★★★★★
0
★★★★★
0
★★★★★
0
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Michael Danielak –
Great product
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
MG in MO –
I’ve been using a hand greenly knockout kit for the longest time this has saved so much time and my knuckles on smaller boxes and allows me to punch then metal that’s behind wire mode boxes to enlarge the half inch holes to 3/4 without the forming the plate
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
lee taylor –
Works great and the price is way lower than any retailer or wholesaler.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Meta –
This is my second Greenlee knockout kit. The first one was purchased probably a decade ago, and is still going strong. It was the smaller set that stops at 1-1/4. I needed a larger set, so I ordered this one. The ratcheting handle beats my old method of a ratchet and socket, as it sits closer to the work and rolls off less. These are far better made than the Chinese knock-offs, like the ones HFT sells. If you only need a hole or two, buy the cheap ones. If you want something that will last years through countless holes, go with Greenlee.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Viqz –
Good product but the new carrying case is poorly designed, as every time you pick the thing up all the dies go everywhere, had to fabricate something on the inside so once you latched the cover it presses down on the dies so nothing moves when picked up and carried.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Jesse Y –
The prices are reasonable
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Michael Danielak –
The media could not be loaded.
I always know when I buy a GreenLee product that it’s money well spent. This punch set is no exception. Being from Canada and always seeing this set normally cost around $550 CAD, I jumped on getting this when I saw it for only $300 USD on Amazon.com while I was in the US. I’ve only used it for 1/2″ punches so far and it works like a charm. It leaves a VERY clean hole without any burs or shards that are usually left from a hole saw or stepper bit. The hole is also perfectly sized for the L16 or conduit nipple to fit into. In order to make the initial hole, I recommend that you do have a stepper bit so you can enlarge your initial pilot hole up to the size required to get the bolt through.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Braden –
Great buy for work. Was tired of using old beat up Kits at work with missing pieces. Bought this and although initially a little steep you can individually replace anything you need to when needed. Great set from greenlee. Sharp, clean cuts and a sturdy case to store the set in. Impressed
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Daniel Z. –
Great product, good value for money. Only issue I had with the set was that when it arrived, the dies had a piece of cardboard above the pointed ends, and they had torn into it, leaving an immense amount of cardboard fibers all over the inside of the case, mixed into all the threads and pre-oiled pieces. It was an absolute mess. Because the fibers stuck to the oil, I had to take everything out and use brake cleaner to get everything cleaned up and then oil it all over again.
Other than that issue, I would recommend this set to anyone with similar needs. Ratchet is much cheaper than the pneumatic versions, and honestly not a big deal if you’re not doing a lot of holes. I do a lot of service work and getting a new panel to fit an old service entrance can be tricky, but it’s much easier with this.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Travis Frazee –
Great will buy again
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Judy Miller –
Quality Greenlee product. Punches beauty holes
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Colin Crombie –
Value for money
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Jim –
I carry the 3/4 and 1″ mostly in my bag, with the equivalent size Knipex Pliers Wrench to the ratchet. The pliers wrench is better because it doesn’t slip off and has the same leverage / speed. If you’re doing home runs or panel work then these make light / quick work of making holes when company hydraulic knockouts aren’t nearby. I keep the case and the larger knockouts in my car because I don’t frequently use them. If I had known about how much better this makes life, I would have just bought the knockouts sooner.
An old man on site users an impact and a 1″ socket to twist these in boxes. I’m not that brave, but it seems to still be sharp years later and still takes it. This is a high quality / durable tool, and is known from the guys in the trades. That’s why I went with this over Klein or Harbor Freight.
Helpful(0)Unhelpful(0)You have already voted this
Only logged in customers who have purchased this product may leave a review.
Amazon.com
Walmart.com
Michael Danielak –
Great product
MG in MO –
I’ve been using a hand greenly knockout kit for the longest time this has saved so much time and my knuckles on smaller boxes and allows me to punch then metal that’s behind wire mode boxes to enlarge the half inch holes to 3/4 without the forming the plate
lee taylor –
Works great and the price is way lower than any retailer or wholesaler.
Meta –
This is my second Greenlee knockout kit. The first one was purchased probably a decade ago, and is still going strong. It was the smaller set that stops at 1-1/4. I needed a larger set, so I ordered this one. The ratcheting handle beats my old method of a ratchet and socket, as it sits closer to the work and rolls off less.
These are far better made than the Chinese knock-offs, like the ones HFT sells. If you only need a hole or two, buy the cheap ones. If you want something that will last years through countless holes, go with Greenlee.
Viqz –
Good product but the new carrying case is poorly designed, as every time you pick the thing up all the dies go everywhere, had to fabricate something on the inside so once you latched the cover it presses down on the dies so nothing moves when picked up and carried.
Jesse Y –
The prices are reasonable
Michael Danielak –
The media could not be loaded.
I always know when I buy a GreenLee product that it’s money well spent. This punch set is no exception. Being from Canada and always seeing this set normally cost around $550 CAD, I jumped on getting this when I saw it for only $300 USD on Amazon.com while I was in the US. I’ve only used it for 1/2″ punches so far and it works like a charm. It leaves a VERY clean hole without any burs or shards that are usually left from a hole saw or stepper bit. The hole is also perfectly sized for the L16 or conduit nipple to fit into. In order to make the initial hole, I recommend that you do have a stepper bit so you can enlarge your initial pilot hole up to the size required to get the bolt through.
Braden –
Great buy for work. Was tired of using old beat up Kits at work with missing pieces. Bought this and although initially a little steep you can individually replace anything you need to when needed. Great set from greenlee. Sharp, clean cuts and a sturdy case to store the set in. Impressed
Daniel Z. –
Great product, good value for money. Only issue I had with the set was that when it arrived, the dies had a piece of cardboard above the pointed ends, and they had torn into it, leaving an immense amount of cardboard fibers all over the inside of the case, mixed into all the threads and pre-oiled pieces. It was an absolute mess. Because the fibers stuck to the oil, I had to take everything out and use brake cleaner to get everything cleaned up and then oil it all over again.
Other than that issue, I would recommend this set to anyone with similar needs. Ratchet is much cheaper than the pneumatic versions, and honestly not a big deal if you’re not doing a lot of holes. I do a lot of service work and getting a new panel to fit an old service entrance can be tricky, but it’s much easier with this.
Travis Frazee –
Great will buy again
Judy Miller –
Quality Greenlee product. Punches beauty holes
Colin Crombie –
Value for money
Jim –
I carry the 3/4 and 1″ mostly in my bag, with the equivalent size Knipex Pliers Wrench to the ratchet. The pliers wrench is better because it doesn’t slip off and has the same leverage / speed. If you’re doing home runs or panel work then these make light / quick work of making holes when company hydraulic knockouts aren’t nearby. I keep the case and the larger knockouts in my car because I don’t frequently use them. If I had known about how much better this makes life, I would have just bought the knockouts sooner.
An old man on site users an impact and a 1″ socket to twist these in boxes. I’m not that brave, but it seems to still be sharp years later and still takes it. This is a high quality / durable tool, and is known from the guys in the trades. That’s why I went with this over Klein or Harbor Freight.