×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
Zreneyfex Ignition Switch Key Set For Honda Shadow
Cylinder & Key Set, Ignition Switch Lock Genuine OEM Part
$132.49
Aftermarket ILA44 - Ignition Switch For Honda
Amazon price updated: August 24, 2026 12:02
All prices mentioned above are in United States dollar.
This product is available at Walmart.com, Amazon.com, eBay, MegaZip.
At walmart.com you can purchase Fyuu 1X Car Ignition Key Switch Replacement Part 35100-Mck-A00 For Honda Shadow Vt for only $13.86 , which is 92% less than the cost in MegaZip ($180.54).
The lowest price of Cylinder & Key Set, Ignition Switch Lock Genuine OEM Part was obtained on August 28, 2026 21:30.
Zreneyfex Ignition Switch Key Set For Honda Shadow Price History
Set Alert for Fyuu 1X Car Ignition Key Switch Replacement Part 35100-Mck-A00 For Honda... - $13.86
Zreneyfex Ignition Switch Key Set For Honda Shadow Description
Ignition Switch Gas Cap replacement for Honda Shadow VT400/750 (1997-2003), Steed VLX 400 (1988-2013)
Function: Its stylish design is perfect to decorate your motorcycle
Female plug, with high performance. Just press down the black rubber ring on the back, then the key can be released and removed as you wish
Package Includes: 1x Ignition lock, 1x Steering lock, 1x Gas cap lock, 1x Helmet locks, 2x keys
Easy Installation: All necessary parts are included, allowing for a straightforward replacement process
Zreneyfex Ignition Switch Key Set For Honda Shadow Specification
Specification: Zreneyfex Ignition Switch Key Set For Honda Shadow
Package Dimensions
5.51 x 4.8 x 3.03 inches, 3.53 ounces
Department
Unisex Adult
Date First Available
October 19, 2020
Manufacturer
Zreneyfex
Country of Origin
China
Zreneyfex Ignition Switch Key Set For Honda Shadow Reviews (11)
11 reviews for Zreneyfex Ignition Switch Key Set For Honda Shadow
3.7out of 5
★★★★★
★★★★★
5
★★★★★
2
★★★★★
1
★★★★★
2
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Melissa –
Needed to rewire it for a 2014 Honda Shadow. 5 min later all plugged in. Gas cap fits well.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Tim –
Lose your key to your bike? No problem. Perfect fit every time. High quality and works perfectly on my bike
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Kyle B. –
Backup and running
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
SterlingS –
This was advertised as a direct replacement for my 2006 Honda VTX 1300R. It is not. I spent some time accessing and removing my ignition switch only to find out they are not the same. Mine has 3 wires, this new one has 5. The plug is totally different, once again a complete waste of my time.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Julisa –
Bought this for my motorcycle… and it has the male plug where my motorcycle has a male plug. I’m all for gay people, but gay electronics don’t work out.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
frandy perez –
Installed the ignition switch and gas gap on my 2011 Honda Shadow Phantom 750 and works great. To add the ignition switch you do have to cut and splice wires as they are not compatible with the originak plug and you only connect two wires to bike do not need to use other wires just cut them off. Attaches to original ignition bracket without much issues but you will need little customization with nuts and bolts.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
angry person who didn’t receive their package –
I ordered this and noticed it’s not plug and play, as the plug on my bike is a 3 prong and the connector on this new ignition is a 4 prong connector, so i cut the new plastic ignition connector block so i could try and manually connect the prongs (i wanted to try connecting 3 out of 4) and after some swearing and frustration it worked with 3 of 4 connect, only 1 of the black ones needs to be connect. but only 1 of them works properly, so if you have issues try switching the black wire to the other (1 other thing to note is the mounting points don’t match so you can only mount it by 1 bolt)
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
stephanie honbarger –
I ordered the wrong one, but it came undamaged and on time
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Christopher Clark –
Not what it said
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Jimmy D. –
Nothing wrong, just would not fit this specific model. It is very close, but mounting bracket is enough different I could not mount.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
tia –
Only complaint isn’t the fact that I had to swap pins out of the connector into the original connecter. But the wires are so short it almost doesn’t reach the bikes harness, but gas cap works, key ignition works, I’m happy with my purchase so far
Helpful(0)Unhelpful(0)You have already voted this
Only logged in customers who have purchased this product may leave a review.
eBay 
Megazip.net 
Walmart.com 
Finditparts.com 
Melissa –
Needed to rewire it for a 2014 Honda Shadow. 5 min later all plugged in. Gas cap fits well.
Tim –
Lose your key to your bike? No problem. Perfect fit every time. High quality and works perfectly on my bike
Kyle B. –
Backup and running
SterlingS –
This was advertised as a direct replacement for my 2006 Honda VTX 1300R. It is not. I spent some time accessing and removing my ignition switch only to find out they are not the same. Mine has 3 wires, this new one has 5. The plug is totally different, once again a complete waste of my time.
Julisa –
Bought this for my motorcycle… and it has the male plug where my motorcycle has a male plug. I’m all for gay people, but gay electronics don’t work out.
frandy perez –
Installed the ignition switch and gas gap on my 2011 Honda Shadow Phantom 750 and works great. To add the ignition switch you do have to cut and splice wires as they are not compatible with the originak plug and you only connect two wires to bike do not need to use other wires just cut them off. Attaches to original ignition bracket without much issues but you will need little customization with nuts and bolts.
angry person who didn’t receive their package –
I ordered this and noticed it’s not plug and play, as the plug on my bike is a 3 prong and the connector on this new ignition is a 4 prong connector, so i cut the new plastic ignition connector block so i could try and manually connect the prongs (i wanted to try connecting 3 out of 4) and after some swearing and frustration it worked with 3 of 4 connect, only 1 of the black ones needs to be connect. but only 1 of them works properly, so if you have issues try switching the black wire to the other (1 other thing to note is the mounting points don’t match so you can only mount it by 1 bolt)
stephanie honbarger –
I ordered the wrong one, but it came undamaged and on time
Christopher Clark –
Not what it said
Jimmy D. –
Nothing wrong, just would not fit this specific model. It is very close, but mounting bracket is enough different I could not mount.
tia –
Only complaint isn’t the fact that I had to swap pins out of the connector into the original connecter. But the wires are so short it almost doesn’t reach the bikes harness, but gas cap works, key ignition works, I’m happy with my purchase so far